Product Summary of Single Layer Coating on Substrates

These are high purity, in almost all cases, single element films consisting of one layer deposited on a solid, rigid, thick substrate. These standards are more robust and usually lower cost than corresponding foil standards but are generally applicable to one or a small set of coating thickness applications. Single layer coating standards on substrates are used by XRF for calibration of one layer thickness testing applications on samples with the same or similar substrates as the standards. If the substrate of the standard is not the same as the substrate of the sample being tested, please consult with your XRF provider before purchasing these standards. These standards are typically mounted in the same frames as foil standards exposing a limited area of the standard for measurement.

Ag/Al (Silver/Aluminium)
Part No.	μin	μm	Availability
SAG800AL999	800	20	Made-to-order
SAG1000AL999	1000	25	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ag/Cu (Silver/Copper)
Part No.	μin	μm	Availability
SAG4CU999	4	0.1	Made-to-order
SAG10CU999	10	0.25	Made-to-order
SAG30CU999	30	.25	Made-to-order
SAG60CU999	60	1.5	Made-to-order
SAG100CU999	100	2.5	Made-to-order
SAG120CU999	120	3	Made-to-order
SAG200CU999	200	5	Made-to-order
SAG150CU999	150	3.75	Made-to-order
SAG350CU999	350	8.75	Made-to-order
SAG400CU999	400	10	Made-to-order
SAG500CU999	500	12.5	Made-to-order
SAG600CU999	600	15	Made-to-order
SAG800CU999	800	20	Made-to-order
SAG1000CU999	1000	25	Made-to-order
SAG1200CU999	1200	30	Made-to-order
SAG2000CU999	2000	50	Made-to-order
SAG2400CU999	2400	60	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ag/Kovar (Silver/Kovar)
Part No.	μin	μm	Availability
SAG60KVR999	60	1.5	Made-to-order
SAG150KVR999	150	3.75	Made-to-order
SAG350KVR999	350	8.75	Made-to-order
SAG450KVR999	450	11.25	Made-to-order
SAG650KVR999	650	16.25	Made-to-order
SZG800KVR999	800	20	Made-to-order
SAG1000KVR999	100	25	Made-to-order
SAG2000KVR999	2000	50	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ag/Ni (Silver/Nickel)
Part No.	μin	μm	Availability
SAG40NI999	40	1	Made-to-order
SAG160NI999	160	4	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Au/Ag (Gold/Silver)
Part No.	μin	μm	Availability
SAU10AG999	10	0.25	Made-to-order
SAU20AG999	20	0.5	Made-to-order
SAU60AG999	60	1.5	Made-to-order
SAU200AG999	200	5	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Au/Al (Gold/Aluminium)
Part No.	μin	μm	Availability
SAU10AL999	10	0.25	Made-to-order
SAU20AL999	20	0.5	Made-to-order
SAU80AL999	80	2	Made-to-order
SAU200AL999	200	5	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Au/Kovar (Gold/Kovar)
Part No.	μin	μm	Availability
SAU10KVR999	10	0.25	Made-to-order
SAU20KVR999	20	0.5	Made-to-order
SAU50KVR999	50	1.25	Made-to-order
SAU90KVR999	90	2.25	Made-to-order
SAU200KVR999	200	5	Made-to-order
SAU300KVR999	300	7.5	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Au/Ni (Gold/Nickel)
Part No.	μin	μm	Availability
SAU4NI999	4	0.1	Made-to-order
SAU10NI999	10	0.25	Made-to-order
SAU20NI999	20	0.5	Made-to-order
SAU30NI999	30	0.75	Made-to-order
SAU40NI999	40	1	Made-to-order
SAU50NI999	50	1.25	Made-to-order
SAU60NI999	60	1.5	Made-to-order
SAU90NI999	90	2.25	Made-to-order
SAU100NI999	100	2.5	Made-to-order
SAU120NI999	120	3	Made-to-order
SAU200NI999	200	5	Made-to-order
SAU300NI999	300	7.5	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Bi/Cu (Bismuth/Copper)
Part No.	μin	μm	Availability
SBI20CU999	20	0.5	Made-to-order
SBI50CU999	50	1.25	Made-to-order
SBI100CU999	100	2.5	Made-to-order
SBI150CU999	150	3.75	Made-to-order
SBI200CU999	200	5	Made-to-order
SBI250CU999	250	6.25	Made-to-order
SBI300CU999	300	7.5	Made-to-order
SBI400CU999	400	10	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Cd/Al (Cadmium/Aluminum)
Part No.	μin	μm	Availability
SCD250AL999	250	6.25	Made-to-order
SCD350AL999	350	8.75	Made-to-order
SCD900AL999	900	22.5	Made-to-order
SCD1200AL999	1200	30	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Cd/Cu (Cadmium/Copper)
Part No.	μin	μm	Availability
SCD40CU999	40	1	Made-to-order
SCD100CU999	100	2.5	Made-to-order
SCD200CU999	200	5	Made-to-order
SCD300CU999	300	7.5	Made-to-order
SCD600CU999	600	15	Made-to-order
SCD800CU999	800	20	Made-to-order
SCD1000CU999	1000	25	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Cd/Fe (Cadmium/Iron)
Part No.	μin	μm	Availability
SCD50FE999	50	1.25	Made-to-order
SCD150FE999	150	3.75	Made-to-order
SCD250FE999	250	6.25	Made-to-order
SCD400FE999	400	10	Made-to-order
SCD500FE999	500	12.5	Made-to-order
SCD800FE999	800	20	Made-to-order
SCD1000FE999	1000	25	Made-to-order
SCD1500FE999	1500	37.5	Made-to-order
SCD2000FE999	2000	50	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Cr/Cu (Chromium/Copper)
Part No.	μin	μm	Availability
SCR60CU999	60	1.5	Made-to-order
SCR80CU999	80	2	Made-to-order
SCR200CU999	200	5	Made-to-order
SCR400CU999	400	10	Made-to-order
SCR600CU999	600	15	Made-to-order
SCR1000CU999	1000	25	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Cr/Fe (Chromium/Iron)
Part No.	μin	μm	Availability
SCR80FE999	80	2	Made-to-order
SCR150FE999	150	3.75	Made-to-order
SCR600FE999	500	12.5	Made-to-order
SCR600FE999	600	15	Made-to-order
SCR800FE999	800	20	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Cu/Al (Copper/Aluminum)
Part No.	μin	μm	Availability
SCU50AL999	50	1.25	Made-to-order
SCU100AL999	100	2.5	Made-to-order
SCU170AL999	170	4.25	Made-to-order
SCU400AL999	400	10	Made-to-order
SCU1000AL999	1000	25	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Cu/Epoxy (Copper/Epoxy)
Part No.	μin	μm	Availability
SCU60EPOXY999	60	1.5	Made-to-order
SCU100EPOXY999	100	2.5	Made-to-order
SCU150EPOXY999	150	3.75	Made-to-order
SCU250EPOXY999	250	6.25	Made-to-order
SCU350EPOXY999	350	8.75	Made-to-order
SCU500EPOXY999	500	13	Made-to-order
SCU650EPOXY999	650	16.25	Made-to-order
SCU1000EPOXY999	1000	25	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Cu/Fe (Copper/Iron)
Part No.	μin	μm	Availability
SCU30FE999	30	0.75	Made-to-order
SCU80FE999	80	2	Made-to-order
SCU100FE999	100	2.5	Made-to-order
SCU200FE999	20.0	5	Made-to-order
SCU400FE999	400	10	Made-to-order
SCU600FE999	600	15	Made-to-order
SCU800FE999	800	20	Made-to-order
SCU1000FE999	1000	25	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Cu/Kovar (Copper/Kovar)
Part No.	μin	μm	Availability
SCU100KVR999	100	2.5	Made-to-order
SCU350KVR999	350	8.75	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ni/AL (Nickel/Aliminium)
Part No.	μin	μm	Availability
SNI20AL999	20	0.5	Made-to-order
SNI60AL999	60	1.5	Made-to-order
SNI100AL999	300	2.5	Made-to-order
SNI150AL999	150	3.75	Made-to-order
SNI250AL999	250	6.25	Made-to-order
SNI750AL999	750	18.75	Made-to-order
SNI900AL999	900	22.5	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ni/Cu (Nickel/Copper)
Part No.	μin	μm	Availability
SNI10CU999	10	0.25	Made-to-order
SNI20CU999	20	0.5	Made-to-order
SNI40CU999	40	1	Made-to-order
SNI50CU999	50	1.25	Made-to-order
SNI60CU999	60	1.5	Made-to-order
SNI80CU999	80	2	Made-to-order
SNI100CU999	100	2.5	Made-to-order
SNI120CU999	120	3	Made-to-order
SNI200CU999	200	5	Made-to-order
SNI300CU999	300	7.5	Made-to-order
SNI400CU999	400	10	Made-to-order
SNI600CU99	600	15	Made-to-order
SNI800CU999	800	20	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ni/Fe (Nickel/Iron)
Part No.	μin	μm	Availability
SNI70FE999	70	1.75	Made-to-order
SNI100FE999	100	2.5	Made-to-order
SNI150FE999	150	3.75	Made-to-order
SNI200FE999	200	5	Made-to-order
SNI400FE999	400	10	Made-to-order
SNI700FE99	700	17.5	Made-to-order
SNI900FE999	900	22.5	Made-to-order
SNI1000FE999	1000	25	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ni/Kov (Nickel/Kovar)
Part No.	μin	μm	Availability
SNI25KVR999	25	0.625	Made-to-order
SNI50KVR999	50	1.25	Made-to-order
SNI100KVR999	100	2.5	Made-to-order
SNI200KVR999	200	5	Made-to-order
SNI400KVR999	400	10	Made-to-order
SNI700KVR99	700	17.5	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Pd/Cu (Palladium/Copper)
Part No.	μin	μm	Availability
SPD4CU999	4	0.1	Made-to-order
SPD10CU999	10	0.25	Made-to-order
SPD200CU999	20	0.5	Made-to-order
SPD40CU999	40	1	Made-to-order
SPD60CU999	60	2.5	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Pd/Ni (Palladium/Nickel)
Part No.	μin	μm	Availability
SPD20NI999	20	0.5	Made-to-order
SPD40NI999	40	1	Made-to-order
SPD80NI999	80	2	Made-to-order
SPD120NI999	120	3	Made-to-order
SPD200NI999	200	5	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Rh/Ni (Rhodium/Nickel)
Part No.	μin	μm	Availability
SRH20NI999	20	0.5	Made-to-order
SRH40NI999	40	1	Made-to-order
SRH80NI999	80	2	Made-to-order
SRH100NI999	100	2.5	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Sn/Al (Tin/Aluminum)
Part No.	μin	μm	Availability
SSN2AL999	2	0.05	Made-to-order
SSN4AL999	4	0.1	Made-to-order
SSN10AL999	10	0.25	Made-to-order
SSN20AL999	20	0.5	Made-to-order
SSN40AL999	20	1	Made-to-order
SSN80AL999	80	2	Made-to-order
SSN120AL999	120	3	Made-to-order
SSN200AL999	200	5	Made-to-order
SSN450AL999	450	11.25	Made-to-order
SSN600AL999	600	15	Made-to-order
SSN800AL999	800	20	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Sn/Cu (Tin/Copper)
Part No.	μin	μm	Availability
SSN4CU999	4	0.1	Made-to-order
SSN10CU999	10	0.25	Made-to-order
SSN20CU999	20	0.5	Made-to-order
SSN40CU999	40	1	Made-to-order
SSN80CU999	80	2	Made-to-order
SSN150CU999	150	3.75	Made-to-order
SSN200CU999	200	5	Made-to-order
SSN300CU999	300	7.5	Made-to-order
SSN400CU999	400	10	Made-to-order
SSN500CU999	500	12.5	Made-to-order
SSN600CU999	600	15	Made-to-order
SSN800CU999	800	20	Made-to-order
SSN1000CU999	1000	25	Made-to-order
SSN1200CU999	1200	30	Made-to-order
SSN2000CU999	2000	50	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Sn/Fe (Tin/Iron)
Part No.	μin	μm	Availability
SSN40FE999	40	1	Made-to-order
SSN200FE999	200	5	Made-to-order
SSN450FE999	450	11.25	Made-to-order
SSN650FE999	650	16.25	Made-to-order
SSN800FE999	800	20	Made-to-order
SSN1400FE999	1400	35	Made-to-order
SSN1800FE999	1800	45	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Sn/Kov (Tin/Kover)
Part No.	μin	μm	Availability
SSN30KVR999	30	0.75	Made-to-order
SSN60KVR999	60	1.5	Made-to-order
SSN100KVR999	100	2.5	Made-to-order
SSN120KVR999	120	3	Made-to-order
SSN200KVR999	200	5	Made-to-order
SSN600KVR999	600	15	Made-to-order
SSN1000KVR999	1000	25	Made-to-order
SSN1800KVR999	1800	45	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Zn/Fe (Zinc/Iron)
Part No.	μin	μm	Availability
SZN100FE999	100	2.5	Made-to-order
SZN200FE999	200	5	Made-to-order
SZN320FE999	320	8	Made-to-order
SZN400FE999	400	10	Made-to-order
SZN500FE999	500	12.5	Made-to-order
SZN600FE999	600	15	Made-to-order
SZN800FE999	800	20	Made-to-order
SZN1000FE999	1000	25	Made-to-order
SZN1200FE999	1200	30	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ni-P/Al (Electroless Nickel/Aluminum) Non-Certified Phosphorus	Nominal Thickness		Nominal Composition		Availability
Part No.	μin	μm	%P	%Ni
SNIP100-94AL999	100	2.5	4	98	Made-to-order
SNIP200-94AL999	200	5	4	98	Made-to-order
SNIP400-94AL999	400	10	4	98	Made-to-order
SNIP600-94AL999	600	15	4	98	Made-to-order
SNIP800-94AL999	800	20	4	98	Made-to-order
SNIP100-92AL999	100	2.5	8	92	Made-to-order
SNIP200-92AL999	200	5	8	92	Made-to-order
SNIP400-92AL999	400	10	8	92	Made-to-order
SNIP600-92AL999	600	15	8	92	Made-to-order
SNIP800-92AL999	800	20	8	92	Made-to-order
SNIP100-88AL999	100	2.5	12	88	Made-to-order
SNIP200-88AL999	200	5	12	88	Made-to-order
SNIP400-88AL999	400	10	12	88	Made-to-order
SNIP600-88AL999	600	15	12	88	Made-to-order
SNIP800-88AL999	800	20	12	88	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ni-P/Cu (Electroless Nickel/Copper) Non-Certified Phosphorus	Nominal Thickness		Nominal Composition		Availability
Part No.	μin	μm	%P	%Ni
SNIP100-96CU999	100	2.5	4	96	Made-to-order
SNIP200-96CU999	200	5	4	96	Made-to-order
SNIP300-96CU999	300	7.5	4	96	Made-to-order
SNIP400-96CU999	400	10	4	96	Made-to-order
SNIP500-96CU999	500	12.5	4	96	Made-to-order
SNIP700-96CU999	700	17.5	4	96	Made-to-order
SNIP100-92CU999	100	2.5	8	92	Made-to-order
SNIP200-92CU999	200	5	8	92	Made-to-order
SNIP300-92CU999	300	7.5	8	92	Made-to-order
SNIP400-96CU999	400	10	8	92	Made-to-order
SNIP500-92CU999	500	12.5	8	92	Made-to-order
SNIP700-92CU999	700	17.5	8	92	Made-to-order
SNIP1000-92CU999	1000	25	8	92	Made-to-order
SNIP100-92CU999	100	2.5	12	88	Made-to-order
SNIP200-92CU999	200	5	12	88	Made-to-order
SNIP300-92CU999	300	7.5	12	88	Made-to-order
SNIP400-96CU999	400	10	12	88	Made-to-order
SNIP500-92CU999	500	12.5	12	88	Made-to-order
SNIP700-92CU999	700	17.5	12	88	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ni-P/Fe (Electroless Nickel/Iron) Non-Certified Phosphorus	Nominal Thickness		Nominal Composition		Availability
Part No.	μin	μm	%P	%Ni
SNIP100-96FE999	100	2.5	4	96	Made-to-order
SNIP200-96FE999	200	5	4	96	Made-to-order
SNIP300-96FE999	300	7.5	4	96	Made-to-order
SNIP400-96FE999	400	10	4	96	Made-to-order
SNIP500-96FE999	500	12.5	4	96	Made-to-order
SNIP700-96FE999	700	17.5	4	96	Made-to-order
SNIP100-92FE999	100	2.5	8	92	Made-to-order
SNIP200-92FE999	200	5	8	92	Made-to-order
SNIP300-92FE999	300	7.5	8	92	Made-to-order
SNIP400-92FE999	400	10	8	92	Made-to-order
SNIP500-92FE999	500	12.5	8	92	Made-to-order
SNIP700-92FE999	700	17.5	8	92	Made-to-order
SNIP800-92FE999	700	17.5	8	92	Made-to-order
SNIP1000-92FE999	1000	25	8	92	Made-to-order
SNIP100-88FE999	100	2.5	12	88	Made-to-order
SNIP200-88FE999	200	5	12	88	Made-to-order
SNIP300-88FE999	300	7.5	12	88	Made-to-order
SNIP400-88FE999	400	10	12	88	Made-to-order
SNIP500-88FE999	500	12.5	12	88	Made-to-order
SNIP700-88FE999	700	17.5	12	88	Made-to-order
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Elements List

Ag/Al
Ag/Cu
Ag/Kov

Ag/Ni
Au/Ag
Au/Al

Au/Kov
Au/Ni
Bi/Cu

Cd/Al
Cd/Cu
Cd/Fe

Cr/Cu
Cr/Fe
Cu/Al

Cu/Epx
Cu/Fe
Cu/Kov

Ni/Al
Ni/Cu
Ni/Fe

NiP/Al
NiP/Cu
NiP/Fe

Ni/Kov
Pd/Cu
Pd/Ni

Rh/Ni
Sn/Al
Sn/Cu

Sn/Fe
Sn/Kov
Zn/Fe

Back to Substrates

Product Summary of Single Layer Coating on Substrates

Ag/Al (Silver/Aluminium)

Part No.

μin

μm

Availability

Ag/Cu (Silver/Copper)

Part No.

μin

μm

Availability

Ag/Kovar (Silver/Kovar)

Part No.

μin

μm

Availability

Ag/Ni (Silver/Nickel)

Part No.

μin

μm

Availability

Au/Ag (Gold/Silver)

Part No.

μin

μm

Availability

Au/Al (Gold/Aluminium)

Part No.

μin

μm

Availability

Au/Kovar (Gold/Kovar)

Part No.

μin

μm

Availability

Au/Ni (Gold/Nickel)

Part No.

μin

μm

Availability

Bi/Cu (Bismuth/Copper)

Part No.

μin

μm

Availability

Cd/Al (Cadmium/Aluminum)

Part No.

μin

μm

Availability

Cd/Cu (Cadmium/Copper)

Part No.

μin

μm

Availability

Cd/Fe (Cadmium/Iron)

Part No.

μin

μm

Availability

Cr/Cu (Chromium/Copper)

Part No.

μin

μm

Availability

Cr/Fe (Chromium/Iron)

Part No.

μin

μm

Availability

Cu/Al (Copper/Aluminum)

Part No.

μin

μm

Availability

Cu/Epoxy (Copper/Epoxy)

Part No.

μin

μm