Skip navigation Accessibility information

Your global supplier for materials

Product Summary of Alloy Coatings on Substrates

Alloy coated substrates consist of an alloy layer deposited on a solid, rigid, thick substrate, where the alloy layer is composed of 2 or more elements. These standards are more robust and usually lower cost than corresponding foil standards but are generally applicable to one or a small set of alloy coating thickness applications. Alloy layer coating standards on substrates are used for calibration of XRF for simultaneous measurement of thickness and composition of alloy layer testing applications on samples with the same or similar substrates as the standards used to calibrate the XRF. If the substrate of the standard is not the same as the substrate of the sample being tested, please consult with your XRF provider before purchasing these standards. These standards are typically mounted in the same frames as foil standards exposing a limited area of the standard for measurement.

Ni-P/Fe (Electroless Nickel/Iron) Certified Phosphorus

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

SNIP100-96FE999C 100 2.5 4 96 Made-to-order
SNIP200-96FE999C 200 5 4 96 Made-to-order
SNIP300-96FE999C 300 7.5 4 96 Made-to-order
SNIP400-96FE999C 400 10 4 96 Made-to-order
SNIP500-96FE999C 500 12.5 4 96 Made-to-order
SNIP700-96FE999C 700 17.5 4 96 Made-to-order
SNIP100-92FE999C 100 2.5 8 92 Made-to-order
SNIP200-92FE999C 200 5 8 92 Made-to-order
SNIP300-92FE999C 300 7.5 8 92 Made-to-order
SNIP400-92FE999C 400 10 8 92 Made-to-order
SNIP500-92FE999C 500 12.5 8 92 Made-to-order
SNIP700-92FE999C 700 17.5 8 92 Made-to-order
SNIP800-92FE999C 700 17.5 8 92 Made-to-order
SNIP1000-92FE999C 1000 25 8 92 Made-to-order
SNIP100-88FE999C 100 2.5 12 88 Made-to-order
SNIP200-88FE999C 200 5 12 88 Made-to-order
SNIP300-88FE999C 300 7.5 12 88 Made-to-order
SNIP400-88FE999C 400 10 12 88 Made-to-order
SNIP500-88FE999C 500 12.5 12 88 Made-to-order
SNIP700-88FE999C 700 17.5 12 88 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ni-P/Al (Electroless Nickel/Aluminum) Certified Phosphorus

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

SNIP100-96AL999C 100 2.5 4 96 Made-to-order
SNIP200-96AL999C 200 5 4 96 Made-to-order
SNIP400-96AL999C 400 10 4 96 Made-to-order
SNIP600-96AL999C 600 15 4 96 Made-to-order
SNIP800-96AL999C 800 20 4 96 Made-to-order
SNIP100-92AL999C 100 2.5 8 92 Made-to-order
SNIP200-92AL999C 200 5 8 92 Made-to-order
SNIP400-92AL999 400 10 8 92 Made-to-order
SNIP600-92AL999 600 15 8 92 Made-to-order
SNIP800-92AL999C 800 20 8 92 Made-to-order
SNIP100-88AL999C 100 2.5 12 88 Made-to-order
SNIP200-88AL999C 200 5 12 88 Made-to-order
SNIP400-88AL999C 400 10 12 88 Made-to-order
SNIP600-88AL999C 600 15 12 88 Made-to-order
SNIP800-88AL999C 800 20 12 88 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ni-P/Cu (Electroless Nickel/Copper) Certified Phosphorus

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

SNIP100-96CU999C 100 2.5 4 96 Made-to-order
SNIP200-96CU999C 200 5 4 96 Made-to-order
SNIP300-96CU999C 300 7.5 4 96 Made-to-order
SNIP400-96CU999C 400 10 4 96 Made-to-order
SNIP500-96CU999C 500 12.5 4 96 Made-to-order
SNIP700-96CU999C 700 17.5 4 96 Made-to-order
SNIP100-92CU999C 100 2.5 8 92 Made-to-order
SNIP200-92CU999C 200 5 8 92 Made-to-order
SNIP300-92CU999C 300 7.5 8 92 Made-to-order
SNIP400-96CU999C 400 10 8 92 Made-to-order
SNIP500-92CU999C 500 12.5 8 92 Made-to-order
SNIP700-92CU999C 700 17.5 8 92 Made-to-order
SNIP1000-92CU999C 1000 25 8 92 Made-to-order
SNIP100-88CU999C 100 2.5 12 88 Made-to-order
SNIP200-88CU999C 200 5 12 88 Made-to-order
SNIP300-88CU999C 300 7.5 12 88 Made-to-order
SNIP400-88CU999C 400 10 12 88 Made-to-order
SNIP500-88CU999C 500 12.5 12 88 Made-to-order
SNIP700-88CU999C 700 17.5 12 88 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Pd-Ni/Cu (Palladium-Nickel/Copper)

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

SPNNI40-80CU999 40 9.4 80 20 Made-to-order
SPNNI60-80CU999 60 13 80 20 Made-to-order
SPNNI80-80CU999 80 2 80 20 Made-to-order
SPNNI100-80CU999 100 2.5 80 20 Made-to-order
SPNNI120-80CU999 120 3 80 20 Made-to-order
SPNNI200-80CU999 200 5 80 20 Made-to-order
SPNNI275-80CU99 275 6.9 80 20 Made-to-order
SPNNI350-80CU999 350 8.8 80 20 Made-to-order
SPNNI450-80CU999 450 11.3 80 20 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Sn-Ni/Cu (Tin-Nickel/Copper)

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

SSNNI375-62CU999 375 9.4 62 38 Made-to-order
SSNNI520-62CU999 520 13 62 38 Made-to-order
SSNNI100-65CU999 100 2.5 65 35 Made-to-order
SSNNI240-65CU999 240 6 65 35 Made-to-order
SSNNI200-70CU999 200 5 70 30 Made-to-order
SSNNI300-70CU999 300 7.5 70 30 Made-to-order
SSNNI450-70CU999 450 11.3 70 30 Made-to-order
SSNNI800-70CU999 800 20 70 30 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Sn-Pb/Cu (Tin-Lead/Copper)

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

SSNPB40-60CU999 40 1 60 40 Made-to-order
SSNPB80-60CU999 80 2 60 40 Made-to-order
SSNPB100-60CU999 100 2.5 60 40 Made-to-order
SSNPB120-60CU999 120 3 60 40 Made-to-order
SSNPB150-60CU999 150 3.8 60 40 Made-to-order
SSNPB200-60CU999 200 4 60 40 Made-to-order
SSNPB300-60CU999 300 7.5 60 40 Made-to-order
SSNPB350-60CU999 350 8.8 60 40 Made-to-order
SSNPB400-60CU999 400 10 60 40 Made-to-order
SSNPB500-60CU999 500 12.5 60 40 Made-to-order
SSNPB600-60CU999 600 15 60 40 Made-to-order
SSNPB800-60CU999 800 20 60 40 Made-to-order
SSNPB900-60CU999 900 22.5 60 40 Made-to-order
SSNPB1000-60CU999 1000 25 60 40 Made-to-order
SSNPB40-90CU999 40 1 90 10 Made-to-order
SSNPB60-90CU999 60 1.5 90 10 Made-to-order
SSNPB80-90CU999 80 2 90 10 Made-to-order
SSNPB100-90CU999 100 2.5 90 10 Made-to-order
SSNPB150-90CU999 150 3.8 90 10 Made-to-order
SSNPB200-90CU999 200 5 90 10 Made-to-order
SSNPB250-90CU999 250 6.3 90 10 Made-to-order
SSNPB300-90CU999 300 7.5 90 10 Made-to-order
SSNPB350-90CU999 350 8.8 90 10 Made-to-order
SSNPB400-90CU999 400 10 90 10 Made-to-order
SSNPB450-90CU999 450 11.3 90 10 Made-to-order
SSNPB600-90CU999 600 15 90 10 Made-to-order
SSNPB700-90CU999 700 17.5 90 10 Made-to-order
SSNPB800-90CU999 800 20 90 10 Made-to-order
SSNPB1000-90CU999 1000 25 90 10 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Zn-Ni/Fe (Zinc-Nickel/Iron)

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

SZNNI100-85FE999 100 2.5 85 15 In Stock!
SZNNI200-85FE999 200 5 85 15 In Stock!
SZNNI400-85FE999 400 10 85 15 In Stock!
SZNNI500-85FE999 500 12.5 85 15 In Stock!
SZNNI600-85FE999 600 15 85 15 In Stock!
SZNNI800-85FE999 800 20 85 15 In Stock!
SZNNI100-92FE999 100 2.5 92 8 Made-to-order
SZNNI200-92FE999 200 5 92 8 Made-to-order
SZNNI400-92FE999 400 10 92 8 Made-to-order
SZNNI500-92FE999 500 12.5 92 8 Made-to-order
SZNNI600-92FE999 600 15 92 8 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.




🕸 Site developed by Ash