Skip navigation Accessibility information

Your global supplier for materials

Product Summary of Alloy Layer Handheld XRF

These standards consist of a single alloy film deposited by sputtering or electroplating methods onto a specific substrate. They may be used to calibrate portable, hand held XRF to measure thickness and composition of samples with coating alloys and substrate where alloy coating consists of the same elements as the standards and the substrate is the same or similar composition to the standard. These standards are solid, inflexible materials which are mounted onto anodized aluminum plates with cross hairs to facilitate positioning and calibration of hand held XRF instruments.

Ni-P/Fe (Electroless Nickel/Iron) Certified Phosphorus

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

HHNIP100-96FE999C 100 2.5 4 96 Made-to-order
HHNIP200-96FE999C 200 5 4 96 Made-to-order
HHNIP300-96FE999C 300 7.5 4 96 Made-to-order
HHNIP400-96FE999C 400 10 4 96 Made-to-order
HHNIP500-96FE999C 500 12.5 4 96 Made-to-order
HHNIP700-96FE999C 700 17.5 4 96 Made-to-order
HHNIP100-92FE999C 100 2.5 8 92 Made-to-order
HHNIP200-92FE999C 200 5 8 92 Made-to-order
HHNIP300-92FE999C 300 7.5 8 92 Made-to-order
HHNIP400-92FE999C 400 10 8 92 Made-to-order
HHNIP500-92FE999C 500 12.5 8 92 Made-to-order
HHNIP700-92FE999C 700 17.5 8 92 Made-to-order
HHNIP800-92FE999C 700 17.5 8 92 Made-to-order
HHNIP1000-92FE999C 1000 25 8 92 Made-to-order
HHNIP100-88FE999C 100 2.5 12 88 Made-to-order
HHNIP200-88FE999C 200 5 12 88 Made-to-order
HHNIP300-88FE999C 300 7.5 12 88 Made-to-order
HHNIP400-88FE999C 400 10 12 88 Made-to-order
HHNIP500-88FE999C 500 12.5 12 88 Made-to-order
HHNIP700-88FE999C 700 17.5 12 88 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ni-P/Al (Electroless Nickel/Aluminum) Certified Phosphorus

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

HHNIP100-96AL999C 100 2.5 4 96 Made-to-order
HHNIP200-96AL999C 200 5 4 96 Made-to-order
HHNIP400-96AL999C 400 10 4 96 Made-to-order
HHNIP600-96AL999C 600 15 4 96 Made-to-order
HHNIP800-96AL999C 800 20 4 96 Made-to-order
HHNIP100-92AL999C 100 2.5 8 92 Made-to-order
HHNIP200-92AL999C 200 5 8 92 Made-to-order
HHNIP400-92AL999 400 10 8 92 Made-to-order
HHNIP600-92AL999 600 15 8 92 Made-to-order
HHNIP800-92AL999C 800 20 8 92 Made-to-order
HHNIP100-88AL999C 100 2.5 12 88 Made-to-order
HHNIP200-88AL999C 200 5 12 88 Made-to-order
HHNIP400-88AL999C 400 10 12 88 Made-to-order
HHNIP600-88AL999C 600 15 12 88 Made-to-order
HHNIP800-88AL999C 800 20 12 88 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Ni-P/Cu (Electroless Nickel/Copper) Certified Phosphorus

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

HHNIP100-96CU999C 100 2.5 4 96 Made-to-order
HHNIP200-96CU999C 200 5 4 96 Made-to-order
HHNIP300-96CU999C 300 7.5 4 96 Made-to-order
HHNIP400-96CU999C 400 10 4 96 Made-to-order
HHNIP500-96CU999C 500 12.5 4 96 Made-to-order
HHNIP700-96CU999C 700 17.5 4 96 Made-to-order
HHNIP100-92CU999C 100 2.5 8 92 Made-to-order
HHNIP200-92CU999C 200 5 8 92 Made-to-order
HHNIP300-92CU999C 300 7.5 8 92 Made-to-order
HHNIP400-96CU999C 400 10 8 92 Made-to-order
HHNIP500-92CU999C 500 12.5 8 92 Made-to-order
HHNIP700-92CU999C 700 17.5 8 92 Made-to-order
HHNIP1000-92CU999C 1000 25 8 92 Made-to-order
HHNIP100-88CU999C 100 2.5 12 88 Made-to-order
HHNIP200-88CU999C 200 5 12 88 Made-to-order
HHNIP300-88CU999C 300 7.5 12 88 Made-to-order
HHNIP400-88CU999C 400 10 12 88 Made-to-order
HHNIP500-88CU999C 500 12.5 12 88 Made-to-order
HHNIP700-88CU999C 700 17.5 12 88 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Pd-Ni/Cu (Palladium-Nickel/Copper)

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

HHPNNI40-80CU999 40 9.4 80 20 Made-to-order
HHPNNI60-80CU999 60 13 80 20 Made-to-order
HHPNNI80-80CU999 80 2 80 20 Made-to-order
HHPNNI100-80CU999 100 2.5 80 20 Made-to-order
HHPNNI120-80CU999 120 3 80 20 Made-to-order
HHPNNI200-80CU999 200 5 80 20 Made-to-order
HHPNNI275-80CU99 275 6.9 80 20 Made-to-order
HHPNNI350-80CU999 350 8.8 80 20 Made-to-order
HHPNNI450-80CU999 450 11.3 80 20 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Sn-Ni/Cu (Tin-Nickel/Copper)

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

HHSNNI375-62CU999 375 9.4 62 38 Made-to-order
HHSNNI520-62CU999 520 13 62 38 Made-to-order
HHSNNI100-65CU999 100 2.5 65 35 Made-to-order
HHSNNI240-65CU999 240 6 65 35 Made-to-order
HHSNNI200-70CU999 200 5 70 30 Made-to-order
HHSNNI300-70CU999 300 7.5 70 30 Made-to-order
HHSNNI450-70CU999 450 11.3 70 30 Made-to-order
HHSNNI800-70CU999 800 20 70 30 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Sn-Pb/Cu (Tin-Lead/Copper)

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

HHSNPB40-60CU999 40 1 60 40 Made-to-order
HHSNPB80-60CU999 80 2 60 40 Made-to-order
HHSNPB100-60CU999 100 2.5 60 40 Made-to-order
HHSNPB120-60CU999 120 3 60 40 Made-to-order
HHSNPB150-60CU999 150 3.8 60 40 Made-to-order
HHSNPB200-60CU999 200 4 60 40 Made-to-order
HHSNPB300-60CU999 300 7.5 60 40 Made-to-order
HHSNPB350-60CU999 350 8.8 60 40 Made-to-order
HHSNPB400-60CU999 400 10 60 40 Made-to-order
HHSNPB500-60CU999 500 12.5 60 40 Made-to-order
HHSNPB600-60CU999 600 15 60 40 Made-to-order
HHSNPB800-60CU999 800 20 60 40 Made-to-order
HHSNPB900-60CU999 900 22.5 60 40 Made-to-order
HHSNPB1000-60CU999 1000 25 60 40 Made-to-order
HHSNPB40-90CU999 40 1 90 10 Made-to-order
HHSNPB60-90CU999 60 1.5 90 10 Made-to-order
HHSNPB80-90CU999 80 2 90 10 Made-to-order
HHSNPB100-90CU999 100 2.5 90 10 Made-to-order
HHSNPB150-90CU999 150 3.8 90 10 Made-to-order
HHSNPB200-90CU999 200 5 90 10 Made-to-order
HHSNPB250-90CU999 250 6.3 90 10 Made-to-order
HHSNPB300-90CU999 300 7.5 90 10 Made-to-order
HHSNPB350-90CU999 350 8.8 90 10 Made-to-order
HHSNPB400-90CU999 400 10 90 10 Made-to-order
HHSNPB450-90CU999 450 11.3 90 10 Made-to-order
HHSNPB600-90CU999 600 15 90 10 Made-to-order
HHSNPB700-90CU999 700 17.5 90 10 Made-to-order
HHSNPB800-90CU999 800 20 90 10 Made-to-order
HHSNPB1000-90CU999 1000 25 90 10 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.

Zn-Ni/Fe (Zinc-Nickel/Iron)

Nominal Thickness

Nominal Composition

Availability

Part No.

μin

μm

%P

%Ni

HHZNNI100-85FE999 100 2.5 85 15 Made-to-order
HHZNNI200-85FE999 200 5 85 15 Made-to-order
HHZNNI400-85FE999 400 10 85 15 Made-to-order
HHZNNI600-85FE999 600 15 85 15 Made-to-order
HHZNNI800-85FE999 800 20 85 15 Made-to-order
HHZNNI100-92FE999 100 2.5 92 8 Made-to-order
HHZNNI200-92FE999 200 5 92 8 Made-to-order
HHZNNI400-92FE999 400 10 92 8 Made-to-order
HHZNNI500-92FE999 500 12.5 92 8 Made-to-order

Notes:-
1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%.
2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%.
3. Uniformity: 5%.
4. Certified Thickness Uncertainty (95% confidence interval) ±5%.

Definition:
a. Definition of uniformity is: (max thickness – min thickness) / average
    Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard.
b. Above specifications prevail unless otherwise stated in a quotation.
c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order.




🕸 Site developed by Ash